Cutek Cutek Proclean

For outstanding protection of timber call

1300 1CUTEK


Where to buy

CUTEK PRODUCTS

TIMBER Protection


ENGINEERED Wood


Cleaning and Stripping


Cutek and colour

  • Cutek oils are suitable for use as a clear, water repellent coating on exterior timber surfaces, however surfaces coated with clear Cutek oils will quickly silver off on exposure to sunlight to produce a natural weathered appearance while still retaining their enhanced dimensional stability characteristics.
  • IF YOU DO NOT WANT YOUR EXTERIOR EXPOSED TIMBER TO SILVER OFF, then specially formulated colourtones are available that MUST be mixed with ALL versions of clear Cutek oils in order to maintain the natural timber colour character, delay silvering, and retain the "freshly oiled look" for longer. Colourtoned Cutek oils can still look like a clear finish on the timber, depending on the colourtone selected.
  • When selecting from the range of colourtones allow for the timber colour to naturally lighten during the first three to eight months after application, as natural weathering and leaching occurs. Colour will last longer on rusticated, or band sawn timbers, and may be maximised by including the colourtone in all subsequent applications of Cutek oil.
  • If colourtoned Cutek has faded over time, wash timbers with Cutek QuickClean and apply a single coat of colourtoned Cutek CD50, Cutek Extreme or Cutek LowVOC to restore the original look of the protected timber.
  • Please note that the natural colour of timbers can vary significantly.

Why would I choose Cutek QuickClean for my project?

Cutek QuickClean is a powerful and cost effective general cleaner, suitable for removing grime from any timber or bamboo surface before regular maintenance coats of Cutek CD50 or Cutek Extreme. If the surface has become grey and weathered, Cutek Proclean may be necessary to remove the grey and brighten the surface. Test a patch with QuickClean first, following the HOW TO USE Cutek QuickClean instructions.

 

Why would I choose Cutek CD33 Naked for my project?

Cutek CD33 Naked is an effective stripper that is one of the safest and mildest available. It is suitable for removing multiple layers of latex paints, stains, varnishes, linseed oils and other film forming coatings that hide the original colour and texture of wood.

Test a patch with CD33 Naked first, following the HOW TO USE Cutek CD33 Naked instructions.

 

Why would I choose Cutek Proclean for my project?

Cutek Proclean Stain Remover is a professional wood restoration agent which cleans, brightens and restores wood and bamboo surfaces to the appearance of new timber. Use when timber is significantly grey and weathered, or to remove stubborn stains such as tannin stains, resin stains, fungal & algae stains, green CCA stains, oil and grease stains. Test a patch with Proclean first, following the HOW TO USE Cutek Proclean instructions.

IMPORTANT
Any existing film on the wood MUST be removed
completely before using Proclean.