Important Information
Please read prior to selecting and applying any CUTEK® Colourtones to wood.
- Before using any CUTEK® Colourtone, it is important to test a free CUTEK® sample sachet on the exact timber you intend to coat, in the exact manner you intend to coat it (brush, lambswool applicator, roller etc).
- Before using any CUTEK® Colourtone such as Burnt Ash, Grey Mist, Light Oak, Smokey Grey, or White Wash, please watch the below video.
- CUTEK® Colourtones are transparent and can vary, these variables include (but are not limited to): the age and porosity of the wood, species, variance in grain and colour, situation, design and structure, aspect, differing exposure to the weather, application technique, and adequacy of preparation.
- Due to the variance in pigment, application technique, exposure etc., CUTEK® Colourtones can weather differently over time.
- For best results, when using a CUTEK® Colourtone you should only apply two coats initially. If exposed to the weather, perform the third coat (your first maintenance coat) 6 months after the initial application, and then inspect the timber annually from that point onwards.